2 Ton Single Girder Pendent Line Control Electric EOT Crane Casting

The structure of the single girder metallurgical crane consists of three main parts: the bridge, the metallurgical electric hoist and the electrical system. The bridge is used to support and move the load longitudinally and consists of a metal structure and a running mechanism. The metal structure includes the main beam, the end beam and the main and end beam connection. The running mechanism consists of four parts: drive unit, transmission unit, brake unit and wheel set. The electric metallurgical hoist carries the lifting and lateral movement loads. The electrical system consists of the main circuit and the control circuit.

Product photo of 2Ton Top quality single girder pendent line control electric EOT casting crane​:

Main Features of 2Ton Top quality single girder pendent line control electric EOT casting crane :

1,Strong box type, one whole shape main beam welded by robot machine, very strong and beautiful.
2, Sand blast for the whole crane steel structure, to make sure the paint is very strong.
3, Six action direction movement, to get enough working area.
4, Anti high temperature
5, Full safety system as follows:
Weight overload protection
Emergency stop system
Over current protection
Short-circuit protection
Phase sequence protection
Zero position protection,Voltage loss protection
Limit switch and stopper for crane long traveling and cross traveling
Overhigh lift and overlow lift limit switch

Attention:

Safety is the most important issue for cranes. To ensure safety, it is forbidden to use the equipment in flammable, explosive or corrosive environments. (Explosion-proof type is required for this).