|
Product Details:
|
| Feature:: | Single Beam Overhead Crane With Grab | Lifting Load: | 3T, 5T |
|---|---|---|---|
| Grab Volume: | 1m^3 Or >=1m^3 | Span: | 7.5-22.5m |
| Power Supply: | 380V 50Hz 3PhAC Or Customizable | Main Electrical Part: | Schneider/Siemens/Chint |
| Control Model: | Remote Control Or Room Control | Motor: | Squirrel Cage Motor |
| Motor Protection Class: | IP44,IP54,IP55 | Working Class: | A3 |
| High Light: | Single Beam Grab Crane,5T LZ Single Beam Grab Crane,Single Girder Overhead Grab Crane |
||
3~5T A3 LZ type single beam grab crane for factory single girder overhead travelling crane
Product description of 3~5 Ton Single Beam Bridge Crane With Electric Hydraulic Double Flap Grab:
LZ grab bridge crane is based on LDA and travels with the grab bucket through a wire rope hoist or a hoist trolley.Cranes generally work indoors, and the working environment temperature is -20℃~50℃.The grab can be customized according to customer needs. The split electro-hydraulic grab can be used in water.
The relative humidity of the air does not exceed 85%. The crane adopts a single main beam structure, and uses an electric hoist as a lifting mechanism, which is suspended on the lower edge of the main beam for lateral movement.
Ground operation adopts squirrel cage motor with self-contained plane brake. Conical winding brake motor is used when operating in the cab. The brake is a conical brake. The reducer adopts one-open and one-close or one-open and two-close involute gear deceleration. Device.)
LDZ type electric overhead single girder grab crane is a light lifting equipment with the lifting mechanism of electric grab,and it can travel on the rails with suitable structure,the whole crane has strong rigidity.
This type crane sit on the tall concrete pillars or mental supports,its shape looks like a bridge.Single girder overhead crane runs longitudinally along the rails laid on the elevated on the both sides.This is able enough to lift materials under the bridge without being hindered by the ground cargo.Single girder overhead crane is one of the most used and largest number of lifting machinery.
Control method:
LDZ type single girder overhead grab crane mainly has two operation methods:ground control and air cabin control with closed model or open model;cabin can be installed on the right side or left side of crane according to the practical situation.And the direction of entering the gate has two forms:sideways and ends in order to satisfy the users’ choice ,users’ different conditions.
Application:
Single girder overhead crane is a main tool and equipment for mechanization and automation of processing in the modern industrial manufacturing and lifting transportation areas.Single girder overhead grab crane is mainly equipped with light class grab for grabbing and transporting materials,so this type crane mainly used for grabbing places such as lump coal, coke, slag, cement and so on.
Product configuration:
LDZ type single girder grab overhead crane mainly includes four parts:mental structure part(main beam and end beam,sometimes including traveling tracks),trolley and crane traveling mechanism,electrical control part and lifting mechanism.
1. Mental Structure Parts: main beam, end beams, traveling tracks;
(1) The main beam adopts the U-shaped groove formed by the steel plate,and then forms the box-shaped beam with the I-beam.The end beams are also rolled into the U-shaped groove with the steel plate,welded into the box-shaped end beams.The main beam and end beams are connected by bolts.
(2)We can supply traveling tracks and bus bar for clients according to customers’ requirements.There have three methods of tracks’ installation:Welding method; bolt fixing method; hook bolt method.
2.Traveling Mechanism: trolley traveling mechanism and crane traveling mechanism.
The traveling of electric wire rope hoist and crane is controlled separately;and traveling motors adopts soft-start squirrel cage with disc-brake;The traveling speed of them is about 20 or 30m/min.
3.Electrical Parts are equipped by famous international electrical brands,The power supply system of the single-girder bridge crane adopts "multi-level seamless sliding line".
4. Hoisting Mechanism:The hoisting motor adopts a large starting torque conical rotor Squirrel cage motor with disc brake; the hoisting mechanism uses light class grab.
Main Features :
Design as per latest technology of ISO,CE Standard
Lifting weight 1-20ton
Span 7.5m-31.5m
Reasonable structure, strong rigidity
According to customer needs can be equipped with different spreader
Standard modular design
Light structure,strong bearing capacity
Low noise, soft starting and stopping ;
Safe and reliable operation
Heavy duty slipring motor,Or Sq.cage motor with VVVF,
IP54 or IP44,insulation class F or H
soft starting and smooth running
Customized grab can be used according to customers
Technical Parameter(customizable)
| Technique parameters | |||
| lifting weight(t) | 3 | 5 | |
| lifting height(m) | 18 | 18 | |
| lifting speed(m/min) | 16 | 16 | |
| false specific gravity of materials | 1 | >=1 | |
| working class | A3 | A3 | |
| travelling speed | trolley | 30(ground controlling); 75(room controlling) |
30(ground controlling); 75(room controlling) |
| crab | 20:30 | 20:30 | |
| grad | volume(m^3) | volume(m^3) | |
| 0.75 | 1.5 | ||
| span | 7.5, 9, 10.5, 12, 13.5, 15, 16.5, 19.5, 22.5 | ||
| Type | light | middle | heavy | extra-heavy |
| Material Bulk Density | 0.8~1.2 | >1.2~2.0 | >2.0~2.8 | >2.8 |
| The ratio of self weight to material weight | 0.75~0.8 | 0.9~1.0 | 1.2~1.4 | 1.5~1.6 |
| Suitable materials | Lump coal, coke, slag, cement | Limestone, bulk coal, peat, sand in water, flaky iron oxide scale | Iron ore, fine ore, heavy clay, iron oxide scale | Bulk ore, bulk manganese ore |
Photos for reference:
FAQ
Are you interested in this LDA series single girder overhead crane?We are ready to quote for you according to your customizable paremeters as follows.
(kindly please provide the following information when sending enquiry to us.)
1. Lifting capacity :_____ton
2. Span :______meters (it is center to center distance between railways)
3. Lifting height :_____meters (it is the distance from center of hook to floor)
4. Travelling length:_____meters
5. Industrial voltage _____V, _____HZ, 3Phases
6. Control mode: Pendent or Remote control or cabin control?
7. Do you also need us to supply rail and bus bar: YES or NO?
8. What material to be lifted?
Welcome your requirements.
Contact Person: Aileen
Tel: +8615736957286
