Product Details:
|
Condition: | New | Warranty: | 1 Year |
---|---|---|---|
Span: | 7.5-31.5m | Feature: | Bridge Crane |
Max. Lifting Height: | 30m | Max. Lifting Load: | 20t |
Application: | Workshop, Warehouse, Factory | Control Method: | Wireless Remote Control, Pendent Line |
High Light: | Single Girder Overhead EOT Crane,31.5m Single Girder Overhead Crane,Pendent line Single Girder Crane |
The single-girder overhead crane is a lifting equipment that is horizontally mounted over workshops, warehouses and stockyards for material hoisting. Because its two ends sit on tall concrete columns or metal supports, it is shaped like a bridge. The bridge of the single-girder bridge crane runs longitudinally along the tracks laid on the elevated on both sides, which can make full use of the space under the bridge to lift materials without being hindered by ground equipment. It is the most widely used and the largest number of hoisting machinery.
LDA single girder overhead cranes are designed and manufactured according to ISO, DIN (Germany) and FEM (Europe) standards. Compact structure, light weight, soft start, stable operation. For workshops, warehouses, goods or material stacking of goods, or mechanical assembly.
Capacity | t | 3 | 5 | 10 | 16 | 20 | ||
Span | 7.5~31.5m | |||||||
Speed | Hoisting | m/min | 8. 8/0.8 | 7. 7/0.7 | 3.5, 3.5/0.35 | 6. 6/0.6 | ||
Travelling of crab | 20 | |||||||
Travelling of crane | Surface | 20(30) | 20 | |||||
Cabin | 20(30) | 20 | ||||||
Electric hoist | Type |
CD1-3 MD1-3 |
CD1-5 MD1-5 |
CD1-10 MD1-10 |
CD1-16 MD1-16 |
HC20T | ||
Lifting height | m | 6,9,12 | 6,9,12,18 | 9,12 | 9,12 | 9,12 | ||
Working class | A3~A5 | |||||||
Power supply | 3-phrase 50HZ 380V |
1). Overload limiter
2). Overcurrent protection,Short circuit protection.
3). Lifting limit switch,cross and long traveling limit switch
4). Gravity limit switch
5). Phase squence protection,Zero position protection.
6). Emergency stop button
7). Voltage loss protection.
Photos of 5Ton LDA Single Girder Overhead Crane with Electric Hoist
Sketch of 5Ton Single Girder Overhead crane with Electric Hoist for sales
Configuration details of the EOT Crane: | ||
Steel plate | Anyang/ Handan Q235 steel | |
Hoist lifting motor | Large starting torque conical rotor Squirrel cage motor with disc brake | |
Trolley traveling motor | Soft starting Squirrel cage with disc brake | |
Crane traveling motor | Soft starting Squirrel cage with disc brake | |
Hoist lifting reducer | 3-level helical gear type, gear and axles are of alloy steel or quailty carbon steel,reducer cover is of cast-iron | |
Trolley traveling reducer | Involute gear reducer LD type | |
Crane traveling reducer | Involute gear reducer LD type | |
Wheel |
50# steel forged wheel, Annealing to stress relief, mid-frequency quenching for tread and flange surface,low tempering After heat treated,Tread and flange surface hardness reach HB300~380 |
|
Bearing | Luoyang | |
Brake | Built in brake | |
Wire rope | High strength wire rope 6x37+FC1770 | |
Hook | Forged 20Mn high strength material forged hook | |
Main Electrical parts | SCHNEIDER | |
Trolley power supply | Festoon cable | |
Control mode | Pendent line control | |
Control panel | YES | |
Cable |
Crane industry special cable YC or YVFB type, bear temperature up to 60’C |
|
Buffer | High quality polyurethane buffer | |
Painting |
Manual brush painting,One alkyd iron red primer painting, two alkyd orange enamel finish painting |
|
Safe features of the EOT Crane: | ||
Weight overload protection device | √ | |
Emergency stop system | √ | |
Over current Protection,Short-circuit Protection | √ | |
Phase sequence protection, Zero position protection,No-Voltage protection | √ | |
Mechanical interlock protection of controller | √ | |
Limit switch for crane long traveling | √ | |
Stopper and Limit switch for trolley cross traveling | √ | |
Lifting up and lower down limit switch | √ | |
High quality polyurethane buffer for crane long traveling protection | √ |
Contact Person: Jenny Zhao
Tel: +8615738330193