|
Product Details:
|
| Model: | MZ | Name: | Heavy Duty Cabin Control 10 TONS Box Type Double Girder Bucket Gantry Crane |
|---|---|---|---|
| Condition: | New | Working Class: | A6/A7/A8 |
| Power Source: | 380V / 400V /415V / 460V | Lifting Speed: | 40.92 M/min |
| Span: | 25m | Working Temperature: | -40℃~+40℃ |
| Warranty: | 1.5 Years | Application: | Port,yard |
| High Light: | Cabin Control Double Girder Gantry Crane,10 TONS Double Girder Gantry Crane,Cabin Control 10 ton gantry crane |
||
Heavy duty Cabin control 10 TONS box type double girder bucket gantry crane
1. Some description for Heavy duty Cabin control 10 TONS box type double girder bucket gantry crane
Double girder bucket gantry crane is usually used in open-air warehouses or along railways. His control method is usually the driver's cab and ground control. It looks in the shape of “A" in appearance. The span of double beam mobile rail grab gantry crane is usually 18-35 meters. Double girder bucket gantry cranes are suitable for warehouses and workshops of metallurgical, cement, chemical and other enterprises to carry ore, limestone, ore powder, coke, coal sand and other bulk particles indoors or in the open air and between fixed spans.Grab buckets are more suitable for bulk materials under natural accumulation. When grabbing underwater materials or special materials, they must be specifically mentioned in the order. When used in the open air, they must be equipped with waterproof equipment.
2. Details for Heavy duty Cabin control 10 TONS box type double girder bucket gantry crane
| Lifting capacity | t | 10 |
| Span | m | 25 |
| Lifing height | m | 10 meters above the track, 10 meters below the track |
| Lift and close speed | m/min | 40.92/40.92 |
| Handcart travelling speed | m/min | 49.6 |
| Crane travelling speed | m/min | 39.7 |
| Total weight of crane | t | 116.5 |
| Max. wheel presure for crane | kN | 22.7 |
| Max. height for coal bogie | mm | 5000 |
| Left arm length | mm | 9850 |
| Right arm length | mm | 10450 |
Main feature:
1. Heavy duty double beam/girder gantry with grab as lifting tool.
2. Working duty could be A6-A8.
3. Soft start, 3-5 speeds to operate, very stable to lift and running.
4. Six direction action, to make sure the enough wide working area.
5. Strong box type steel structure of crane
6. Full safety system as follows:
Weight overload protection
Emergency stop system
Over current protection,Short-circuit protection
Phase sequence protection
Zero position protection
Voltage loss protection
crane long traveling and cross traveling limit switch and stopper
Lifting overhigh and overlow limit switch
Attention:
Safety is the most important issue for cranes. To ensure the safety,It is prohibited to use the equipment in the combustible, explosive or corrosives environment.(Need explosion proof type for this).
3. FAQ:
1). How many operating methods for my selection? Standard operating methods: A: pendent controller with push buttons .B: remote control with push buttons C: cabin(space capsule seat) control with joystick. Choose any type as you like.
2). Can this type work in hazardous environment? Sure! We can customize for you, acid proof or explosion proof, no problem for that.
3). Can you provide the serious lifting tools? Sure, we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!
4). How can we install the crane? Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.
5). Safety device Overload limiter, Limit Switch (lifting and traveling), Interlock protection device.
Contact Person: Amber Wang
Tel: +8615736957286
