|
Product Details:
|
| Product Name: | 40T Cabin Control Electric Hoist Double Beam European Type Overhead Traveling Crane | Motor Type: | Frequency Control Three-phase Asynchronous Motor |
|---|---|---|---|
| Ntrol Method: | Cab Control | Safety Device: | Anti-collision And Overload Protection |
| Electric Parts: | Schneider | Lifting Mechanism: | Winch Trolley |
| Lifting Speed: | 0-3.25m/min By VVVF Control | Lifting Weight: | 40 Ton |
| Lifting Reducer: | Multi Level Gears That Are Surface Hardened | Brake: | Normally Closely Brake |
| High Light: | Cabin Control Electric Hoist Crane,40T Electric Hoist Crane,40T Dg Eot Crane |
||
40T Cabin Control Electric Hoist Double Beam European Type Overhead Traveling Crane
Product Description of 40T Cabin Control Electric Hoist Double Beam European Type Overhead Traveling Crane:
KSQ double girder bridge crane's design, manufacture and test are as per the relevant national standards that are latestly promulgated, equal to the standards of FEM, DIN, IEC etc.The crane is consisted of the main girders, driving end girders, hoisting trolley, bridge frame accessories and electric control system.
The core component of the transmission mechanism reducer,adopts hardened gear surface,high precision gear pair.In addition,steel reel,forged wheel and frequency conversion speed control system are employed.All these make this crane a product for replacement due to its economic and social benefits.
This product is suitable for material handing for mechanical processing,manufacturing,assembly,repair shop and warehouse.
The Crane is based on the introduction and digestion of foreign advanced technology.With modular design theory as a guide,modern computer technology as a means,methods for optimal design and reliability design are adopted.In addition,high-end configuration, new materials and new technologies are used.This crane features light weight,modular unit,energy saving and high technology.
.
Technical Parameter(customizable) of 40T Cabin Control Electric Hoist Double Beam European Type Overhead Traveling Crane:
| KSQ Double Beam Bridge Crane | ||||||||
| Lifting Weight (t) | 5 | 10 | 16 | 20 | 25 | 32 | 40 | 50 |
| Working Level | FEM 2M A5 | |||||||
| Lifting Height (m) | 6/9/12/15/18/24 | |||||||
| Lifting Speed (m/min) | 5/0.8 | 4/0.67 | 0-4.9 | 0-3.2 | ||||
| Span (m) | 10.5-31.5 | |||||||
| Operating Mode | Groud manual switch/Remote control/Driver's cabin | |||||||
| Vehicle Weight (t) | 4.7-17.6 | 4.9-22.4 | 7.4-24.6 | 8-28.3 | 9.4-32.2 | 10.4-34.5 | 13.6-38.1 | 14.6-40.1 |
| Wheel Pressure (kN) | 43-74 | 69-105 | 110-154 | 130-180 | 158-215 | 201-261 | 254-315 | 311-375 |
| Track Model | P38 | P38 | P38 | P38 | P38 | QU70 | QU70 | QU70 |
| Total power (kW) | 13.56 | 14.5 | 16.5 | 20.9 | 24.4-28 | 30.2/32.2 | 39/41 | 41/43 |
Sketch of 40T Cabin Control Electric Hoist Double Beam European Type Overhead Traveling Crane:
Photo of Hoist Trolley
Photo of 40T Cabin Control Electric Hoist Double Beam European Type Overhead Traveling Crane:
Main Features of 40T Cabin Control Electric Hoist Double Beam European Type Overhead Traveling Crane:
1, Overhead traveling on the steel structure, normally in workshop, heavy working duty from A5-A8
2, Light self weight, could save steel structure cost.
3, Lifting and traveling is very accurate.
4, VVF/ frequency inverter control, 3-5 speeds to operate, very stable to lift and running.
5, Six direction action, to make sure the enough wide working area.
6, Full safety system as follows:
Weight overload protection
Emergency stop system
Over current protection,Short-circuit protection
Phase sequence protection
Zero position protection
Voltage loss protection
Limit switch and stopper for crane long traveling and cross traveling
Lifting overhigh and overlow limit switch
Delivery case
Main Product
Henan Mine Crane meet the demands of factory, workshop, port, mining, waste disposal, goods dispatching, petrochemical, aerospace, military and other industries with universal bridge crane, overhead crane, gantry crane,goliath crane,frame crane,door crane,universal gantry crane, rubber tyre and rail mounted container gantry crane, mining grab crane, gantry crane, scissor type mobile hydraulic platforms and other types of hydraulic crane.
Company Introduction:
FAQ of Double Beam Bridge Crane:
A: Can you provide customized service?
B: Yes, of course. We are manufacturer and we have our own engineer dept. They can work out customized design according to your requirements. You can tell us what job do you use the crane to do and tell us relevant parameters,i.e ton,span,lifting height,travel lengh,etc.
A: Are there any professional technicians to assist our installation?
B: Yes. We have a professional installation team, who have already been to many countries to assist the installation. If you need us to provide such service, please let us know in advance, so that we can send you offer for this installation and commissioning job, then we arrange the suitable technicians to your country timely.
A: Whether or not you can offer the matched spare parts?
B: Yes, as a crane manufacturer, we can offer all the related spare parts. Such as motor, reducer,brake,wirerope, bearing, electric hoist, electric winch, rope drum, wheel, grab, hook, rail, end beam or end truck, copper bus bar or aluminium bus bar, etc.
A: How can you ensure the quality?
B: Before delivery, every product will be tested strictly in our workshop and we will send you the quality certification. You are also warmly welcomed to our factory to make the inspections before delivery.
Contact Person: Aileen
Tel: +8615736957286
