|
Product Details:
|
| Control Method: | Remote Control, Pendant Control | Lifting Mechanism: | European Electric Hoist |
|---|---|---|---|
| Power Source: | 3 Phase 380V 50hz | Crane Speed: | 20m/min |
| Lifting Speed: | 0.8/5m/min | Working Class: | A5 |
| Span: | 11m | Product Name: | 10 Ton European Style Low Headroom Single Girder Bridge Crane With European Type Wire Rope Hoist |
| High Light: | European Electric Single Beam Crane,European 5T Electric Single Beam Crane,European single beam overhead crane |
||
5 Ton Remote Control European Single Beam Electric Bridge Travelling Crane
Product Description of European Type Single Beam Overhead Crane:
European single girder overhead crane is composed of girder weld by steel plate and I-steel, end girder, electric hoist and travelling mechanism. The electric hoist runs along the lower flange of the I-steel of the girder to accomplish article hoisting. It features light structure and easy installation and maintenance, and is widely used for different places for hoisting, such as factories, warehouses and material yards. It is prohibited to use in the environment with inflammable, explosive and corrosive media.
Main Features of European single girder overhead crane:
Feature:
1, Overhead traveling on the steel structure, normally in workshop
2, Light self weight, could save steel structure cost.
3, Lifting and traveling is very accurate.
4, VVF/ frequency inverter control, continuous speeds to operate, very stable to lift and traveling.
5, Six direction action, to make sure the enough wide working area.
6, Full safety system as follows:
Weight overload protection
Emergency stop system
Over current protection,Short-circuit protection
Phase sequence protection
Zero position protection
Voltage loss protection
Limit switch and stopper for crane long traveling and cross traveling
Lifting overhigh and overlow limit switch
Attention:
Safety is the most important issue for cranes. To ensure the safety,It is prohibited to use the equipment in the combustible, explosive or corrosives environment.(Need explosion proof type for this).the following safety devices are equiped in Crane.
1. crane traveling limit switch.
2. Weight overload protection device.
3. Lifting height limit device.
4. Voltage lower protection function.
5. Emergency stop function.
Product Structure
| Capacity | t | 5t | |||||||||
| Span | m | 9.5 | 12.5 | 16 | 19.5 | 22.5 | 24 | ||||
| Total weight | kg | 2218~7201 | |||||||||
| Trolley weight | kg | 500 | |||||||||
| Max. Wheel load | kn | 28.2~42.62 | |||||||||
| Travel rail | P24/P38 | ||||||||||
| Lifting speed | m/min | 0.8/5 | 0.8/5 | 0.8/5 | 0.8/5 | 0.8/5 | 0.8/5 | ||||
| Lifting height | m | ≥ 6 | ≥ 6 | ≥ 6 | ≥ 6 | ≥ 6 | ≥ 6 | ||||
| Total motor power | kw | 14.5 | 14.5 | 14.5 | 14.5 | 14.5 | 14.5 | ||||
| Crane speed | m/min | 20 | 20 | 20 | 20 | 20 | 20 | ||||
| Trolley speed | m/min | 20 | 20 | 20 | 20 | 20 | 20 | ||||
| Working duty | A5 | ||||||||||
Sketch picture
Contact Person: Cassie Zhang
Tel: +8615736957286
